NSN 5305-01-082-0128
Bolt Stove
Between 0.657 inches and 0.688 inches fastener length, flat countersunk head style, between 0.231 inches and 0.279 inches head diameter, internal drive style: torque set.
Manufacturer part number NAS1102E06-11 for national stock number 5305010820128.
Datasheet
-
Product description
Machine Screw NSN 5305-01-082-0128.
-
MPN or Model
NAS1102E06-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.538 inches and 0.631 inches -
Fastener Length
Between 0.657 inches and 0.688 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.231 inches and 0.279 inches -
Internal Drive Style
Torque set -
Thread Diameter
0.138 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Iron alloy 660 -
Screw Material Specification
Ams 5737 assn standard single material response -
Screw Surface Treatment
Passivate -
Screw Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1102 professional/industrial association standard
More from these suppliers
- 5940-01-435-3630 MPN NAS1063A6-510ATerminal Board Marker Strip
- 1560-01-423-0213 MPN NAS6708D38Aircraft Structural Component Support
- 5305-00-004-5186 MPN NAS1102-4-40Machine Screw
- 5305-00-060-4372 MPN NAS1133-16Close Tolerance Screw
- 5305-00-068-5276 MPN MS16995-9Socket Head Cap Screw
- 5305-00-081-6728 MPN MS24667-31Socket Head Cap Screw
- 5305-00-082-6741 MPN MS51959-108Machine Screw
- 5305-00-141-7207 MPN NAS1155V34Close Tolerance Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-082-0128 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1102E06-11 | National Aerospace Standards |