NSN 5305-01-082-0150
High Torque Screw
Between 0.750 inches and 0.790 inches fastener length, flat chamfer head style, between 0.3112 inches and 0.3117 inches head diameter, head height: between 0.253 inches and 0.273 inches .
Manufacturer part number VS2796-3-6 for national stock number 5305010820150.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-082-0150.
-
MPN or Model
VS2796-3-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.375 inches and 0.395 inches -
Fastener Length
Between 0.750 inches and 0.790 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.3112 inches and 0.3117 inches -
Head Height
Between 0.253 inches and 0.273 inches -
Grip Diameter
Between 0.1889 inches and 0.1894 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Internal Drive Style
Hexagon -
Thread Diameter
0.190 inches -
Grip Length
Between 0.375 inches and 0.395 inches -
Width Across Flats
Between 0.1562 inches and 0.1587 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
170000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.653 inches first hole and 0.713 inches first hole -
Surface Finish
32.0 microinches threads -
Material
Steel comp 630 -
Material Specification
Fms-0131 fscm 81755 mfr ref single material response or ams-5643 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Mil-s-5002 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-479-0016 MPN AIC1023H5-25Close Tolerance Screw
- 5305-00-781-2063 MPN AIC813-5-R31Machine Screw
- 5305-00-802-0571 MPN 51B221-5Close Tolerance Screw
- 5305-00-826-9971 MPN SK2015-703Machine Screw
- 5305-00-840-5962 MPN 965336-1Externally Relieved Body Screw
- 5305-01-004-9496 MPN AIC812-08-7Machine Screw
- 5305-01-004-9520 MPN AIC817-08-107CSocket Head Cap Screw
- 5305-01-025-1345 MPN NAS1101E06-8Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-082-0150 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS2796-3-6 | Alcoa Global Fasteners, Inc. |
AIC1025-3-6 | Sps Technologies, Llc |
64494-3-6 | Sps Technologies, Llc |
C630-3-6 | Lockheed Martin Corporation |