NSN 5305-01-082-8243
High Torque Screw
Between 0.685 inches and 0.705 inches fastener length, crowned hexagon head style, between 0.096 inches and 0.110 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number NASM23964 for national stock number 5305010828243.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-082-8243.
-
MPN or Model
NASM23964
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.263 inches and 0.323 inches -
Fastener Length
Between 0.685 inches and 0.705 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.096 inches and 0.110 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.1889 inches and 0.1894 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.190 inches -
Grip Length
Between 0.312 inches and 0.328 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
63000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.595 inches first hole and 0.615 inches first hole -
Surface Finish
32.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-054-9245 MPN CA2658-5-35Close Tolerance Screw
- 5305-01-196-2741 MPN CA2194-4-11Close Tolerance Screw
- 5305-01-521-8493 MPN CA2221-4-9-10Mate Aircraft Screw
- 5306-00-483-9591 MPN 6865506Shoulder Bolt
- 5935-00-687-1129 MPN NAS715-11AElectrical Receptacle Connector
- 5940-01-451-4407 MPN NAS1063A10-105BVTerminal Board Marker Strip
- 5940-01-394-5134 MPN NAS707S1Stud Terminal
- 5305-00-001-4782 MPN NAS1351-8-56PSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-082-8243 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NASM23964 | National Aerospace Standards |
NASM3369B305 | National Aerospace Standards |
MS3369B305 | Military Standards |
CA2658-3-05 | Arconic Global Fasteners & Rings, |
AS169-3-05 | Avibank Mfg., Inc. |
CA2658-3-05 | Arconic Global Fasteners & Rings, |
AS169-3-05 | Avibank Mfg., Inc. |