NSN 5305-01-087-1918
Bolt Stove
1.766 inches fastener length, flat countersunk head style, between 0.704 inches and 0.762 inches head diameter, hole diameter: between 0.096 inches and 0.116 inches .
Manufacturer part number NAS1156-22D for national stock number 5305010871918.
Datasheet
-
Product description
Machine Screw NSN 5305-01-087-1918.
-
MPN or Model
NAS1156-22D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.391 inches -
Fastener Length
1.766 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.704 inches and 0.762 inches -
Hole Diameter
Between 0.096 inches and 0.116 inches -
Internal Drive Style
Torque set -
Thread Diameter
0.375 inches -
Hole Quantity
1 -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
Between 36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Screw Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Screw Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5626 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Screw Surface Treatment
Cadmium -
Screw Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Head Hole Configuration Style
Round -
Thread Series Designator
Unf
More from these suppliers
- 5935-01-323-4641 MPN MS33687-24-28PElectrical Connector Insert
- 1560-01-423-0218 MPN NAS6808D39Aircraft Structural Component Support
- 5940-01-425-6042 MPN NAS1063A5-437Terminal Board Marker Strip
- 5940-01-425-6511 MPN NAS1063A5-444Terminal Board Marker Strip
- 5305-00-059-4579 MPN NAS1133-6Close Tolerance Screw
- 5305-00-115-6186 MPN MS21097-3012Socket Head Cap Screw
- 5305-00-151-5750 MPN NAS1101C06-14BMachine Screw
- 5305-00-167-3894 MPN MILS7839Machine Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-087-1918 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1156-22D | National Aerospace Standards |