NSN 5305-01-089-6018
High Torque Screw
Between 0.511 inches and 0.541 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number ST3M714-3-4 for national stock number 5305010896018.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-089-6018.
-
MPN or Model
ST3M714-3-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.511 inches and 0.541 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
High-torque -
End Application
Aircraft, eagle f-15; aircraft, harrier av-8b -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Material Specification
23-112 type c, fscm 76301 mfr ref single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-164-7003 MPN HT8039-4-6Close Tolerance Screw
- 5305-00-283-4583 MPN ST3M430V3-8ASClose Tolerance Screw
- 5305-00-420-0669 MPN CVC241-3-15Machine Screw
- 5305-00-815-9187 MPN 53B333-12Machine Screw
- 5305-00-823-5809 MPN NAS1102-06-14Machine Screw
- 5305-01-025-6960 MPN HT4049-4D11Close Tolerance Screw
- 5305-01-025-6961 MPN HT4049-4D14Close Tolerance Screw
- 5305-01-158-5373 MPN SC2163-5-6Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-089-6018 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M714-3-4 | Boeing Company, The |
HT4049-3-4 | Sps Technologies, Llc |
HT4049-3-4 | Hi-shear Corporation |
HT4049-3-4 | Arconic Global Fasteners & Rings, |
ST3M714-3-4 | Huck International, Inc. |
ST3M714-3-4 | Fastener Innovation Technology, Inc. |
ST3M714-3-4 | West Coast Aerospace Inc |
HT4049-3-4 | Lisi Aerospace Canada Corp |
HT4049-3-4 | Huck Intl Inc |
HT4049-3-4 | Sps Technologies, Llc |
HT4049-3-4 | Alcoa Global Fasteners, Inc. |