NSN 5305-01-090-7163
High Torque Screw
6.428 inches fastener length, crowned hexagon head style, between 0.126 inches and 0.141 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number AS205-04-96 for national stock number 5305010907163.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-090-7163.
-
MPN or Model
AS205-04-96
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.287 inches and 0.318 inches -
Fastener Length
6.428 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 6.000 inches and 6.016 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
170000 pounds per square inch -
Hardness Rating
38.0 rockwell c fastener and 45.0 rockwell c fastener -
Distance From Head Largest Bearing Surface To Shank Hole Center
6.323 inches first hole and 6.343 inches first hole -
Surface Finish
32.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 631 spring or steel comp 302 spring -
Material Specification
Ams 5673 assn standard 1st material response spring or qq-w-423 federal specification 2nd material response spring -
Surface Treatment
Passivate spring -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response spring -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-004-1443 MPN A51B24183-8Bleed Door Scoop
- 1560-00-047-1904 MPN 89L1033-1Latch Assembly
- 5930-00-063-5274 MPN 128SCAV250-31Toggle Switch
- 1680-00-075-0767 MPN 123ABM10015-3Seat Base Roller
- 1560-00-114-1655 MPN 128B11783-10Spotweld Assy
- 1560-00-124-2785 MPN 128EC11013-5Inlet Assembly
- 1560-00-148-8974 MPN A51B42011-11Aircraft Door Block
- 5935-00-198-3926 MPN GC800B19-20PXElectrical Plug Connector
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-090-7163 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AS205-04-96 | Avibank Mfg., Inc. |
GB511DW4-96 | Northrop Grumman Systems Corporation |
CA2658-4-96 | Arconic Global Fasteners & Rings, |
AS205-04-96 | Avibank Mfg., Inc. |
GB511DW4-96 | Northrop Grumman Systems Corporation |
CA2658-4-96 | Arconic Global Fasteners & Rings, |