NSN 5305-01-097-8211
High Torque Screw
Between 1.604 inches and 1.634 inches fastener length, between 0.3735 inches and 0.3745 inches grip diameter, offset cruciform (torque set) internal drive style, thread diameter: 0.375 inches.
Manufacturer part number HR101H6-18 for national stock number 5305010978211.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-097-8211.
-
MPN or Model
HR101H6-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.469 inches and 0.519 inches -
Fastener Length
Between 1.604 inches and 1.634 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Surface Finish
32.0 microinches grip -
Material
Steel comp h11 -
Material Specification
Ams 6485 assn standard single material response -
Surface Treatment
Nickel -
Surface Treatment Specification
Ams 2416 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-217-7712 MPN 191488Machine Screw
- 5305-00-505-3196 MPN LS15264V3-14Machine Screw
- 5305-00-547-3451 MPN AIC792-5-15Close Tolerance Screw
- 5305-00-815-3717 MPN NAS1102-04-7Machine Screw
- 5305-01-046-2081 MPN HT4010-6-8Shoulder Screw
- 5305-01-056-5452 MPN BACB30LU5-4Close Tolerance Screw
- 5305-01-131-2209 MPN HT4025L6-16Close Tolerance Screw
- 5305-01-251-6370 MPN BACB30LU4-41Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-097-8211 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HR101H6-18 | Hi-shear Corporation |
AIC1023H6-18 | Sps Technologies, Llc |
64040H6-18 | Sps Technologies, Llc |
VT1039H6-18 | Alcoa Global Fasteners, Inc. |
CS318642H6-18 | Textron Fastening Systems |
C387H6-18 | Lockheed Martin Corporation |
6404H6-18 | Sps Technologies, Llc |