NSN 5305-01-100-8791
High Torque Screw
Between 3.330 inches and 3.360 inches fastener length, flat countersunk head style, between 0.337 inches and 0.383 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number BACB30LU3-48 for national stock number 5305011008791.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-100-8791.
-
MPN or Model
BACB30LU3-48
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.320 inches and 0.370 inches -
Fastener Length
Between 3.330 inches and 3.360 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.337 inches and 0.383 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 2.990 inches and 3.010 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response or ams 6322 assn standard 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-507-2176 MPN LS15265V4-12Close Tolerance Screw
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-01-495-9257 MPN 3M1170C3-3AClose Tolerance Screw
- 5305-01-562-7449 MPN 3M1170V4-13AClose Tolerance Screw
- 5306-00-092-6833 MPN VFK100G-06017Shear Bolt
- 5306-00-142-4907 MPN 4J33042-101BShoulder Bolt
- 5306-00-538-9082 MPN BACB30NE4H11Shear Bolt
- 5306-00-815-4973 MPN 3M33-3-33AClose Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-100-8791 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LU3-48 | Huck International, Inc. |
BACB30LU3-48 | The Boeing Company |
BACB30LU3048 | Sps Technologies, Llc |
BACB30LU3-48 | Sonic Industries Inc. |
BACB30LU3-48 | Valley-todeco, Inc. |
BACB30LU3-48 | Sps Technologies, Llc |
BACB30LU3-48 | Arconic Global Fasteners & Rings, |
BACB30LU3-48 | Federal Manufacturing Corporation |
BACB30LU3-48 | Sps Technologies, Llc |
BACB30LU3-48 | Sps Technologies, Llc |
BACB30LU3-48 | Alcoa Global Fasteners, Inc. |
BACB30LU3-48 | Huck Intl Inc |
BACB30LU3048 | Sps Technologies, Llc |