NSN 5305-01-101-4837
High Torque Screw
Between 0.507 inches and 0.537 inches fastener length, oval countersunk head style, between 0.390 inches and 0.394 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number HT4016-4-2 for national stock number 5305011014837.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-101-4837.
-
MPN or Model
HT4016-4-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.326 inches and 0.397 inches -
Fastener Length
Between 0.507 inches and 0.537 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.390 inches and 0.394 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-014-2584 MPN S5008-3-5Close Tolerance Screw
- 5305-01-024-9881 MPN DMSPWW7500-8-A-4Panel Screw Assembly
- 5305-01-102-0313 MPN HT6069-5-17AClose Tolerance Screw
- 5305-01-106-7503 MPN NAS1221-4-3Machine Screw
- 5305-01-107-6367 MPN BM21010-3-12Shoulder Screw
- 5305-01-131-2208 MPN HT4025L6-14Close Tolerance Screw
- 5305-01-142-7190 MPN HT4041-4-7-5YShoulder Screw
- 5305-01-174-2709 MPN 51B650-3-7Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-101-4837 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4016-4-2 | Huck International, Inc. |
HT4016-4-2 | Huck Intl Inc |