NSN 5305-01-102-5520
High Torque Screw
Between 0.699 inches and 0.729 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number ST3M714-3-7 for national stock number 5305011025520.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-102-5520.
-
MPN or Model
ST3M714-3-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.699 inches and 0.729 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Material Specification
23-112 fscm 76301 mfr ref single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-508-2691 MPN LS15262V3-19Machine Screw
- 5305-01-116-9174 MPN ST3M733-3L7Close Tolerance Screw
- 5305-01-373-4839 MPN 3M925C6-12AClose Tolerance Screw
- 5305-01-413-8480 MPN GB510FG4-27Close Tolerance Screw
- 5305-01-435-6614 MPN BACB30LU9-27Close Tolerance Screw
- 5305-01-604-8547 MPN 3M1277E4D8ALMachine Screw
- 5306-00-467-0871 MPN J644P10AMachine Bolt
- 5306-00-914-3866 MPN STSBG003A14U040Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-102-5520 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M714-3-7 | Boeing Company, The |
HT4049-3-7 | Sps Technologies, Llc |
HT4049-3-7 | Hi-shear Corporation |
HT4049-3-7 | Arconic Global Fasteners & Rings, |
HT4049-3-7 | Huck International, Inc. |
ST3M714-3-7 | Fastener Innovation Technology, Inc. |
ST3M714-3-7 | Sps Technologies, Llc |
WC4049-3-7 | West Coast Aerospace Inc |
HT4049-3-7 | Lisi Aerospace Canada Corp |
HT4049-3-7 | Huck Intl Inc |
HT4049-3-7 | Alcoa Global Fasteners, Inc. |
ST3M714-3-7 | Valley-todeco, Inc. |
HT4049-3-7 | Sps Technologies, Llc |
ST3M714-3-7 | Heartland Precision Fasteners, Inc. |
ST3M714-3-7 | Houston Precision Fasteners I, Lp |
HT4049-3-7 | Sps Technologies, Llc |
HT4049-3-7 | Sps Technologies, Llc |
11931-3-7 | Reid Products Inc. |