NSN 5305-01-108-2524
High Torque Screw
Between 0.923 inches and 0.953 inches fastener length, flat countersunk head style, 0.564 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number HT4072-6D8-7 for national stock number 5305011082524.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-108-2524.
-
MPN or Model
HT4072-6D8-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
2.4 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.438 inches -
Fastener Length
Between 0.923 inches and 0.953 inches -
Head Style
Flat countersunk -
Head Diameter
0.564 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.111 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.798 inches first hole and 0.838 inches first hole -
Material
Stainless steel -
Material Specification
23-112 fscm 76301 mfr ref single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Mil-c-83488 type 2 class 3 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-2987 MPN LS15264-3-12Machine Screw
- 5305-01-412-7541 MPN VCL0009-4-35Close Tolerance Screw
- 5305-01-477-5966 MPN 3M1170D5-8AClose Toleran Screw
- 5306-00-321-2293 MPN VAL23029-4-10Close Tolerance Bolt
- 5306-00-516-5998 MPN VEP220555-8-23Machine Bolt
- 5306-01-004-6409 MPN 9138M30P01Shoulder Bolt
- 5306-01-044-5196 MPN VAL23607-5D25Shoulder Bolt
- 5306-01-059-7456 MPN BACB30LE4U18Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-108-2524 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4072-6D8-7 | Huck International, Inc. |
3M938-6D8-7 | Boeing Company, The |
HT4072-6D8-7 | Sps Technologies, Llc |
HT4072-6D8-7 | Alcoa Global Fasteners, Inc. |
HT4072-6D8-7 | Hi-shear Corporation |
HT4072-6D8-7 | Lisi Aerospace Canada Corp |
HT4072-6D8-7 | Sps Technologies, Llc |
HT4072-6D8-7 | Huck Intl Inc |
HT4072-6D8-7 | Deutsch Fastener Corp |
3M938-6D8-7 | Arconic Global Fasteners & Rings, |
3M938-6D8-7 | Valley-todeco, Inc. |
3M938-6D8-7 | Sps Technologies, Llc |
3M938-6D8-7 | Heartland Precision Fasteners, Inc. |
3M938-6D8-7 | Huck International, Inc. |
3M938-6D8-7 | Houston Precision Fasteners I, Lp |
3M938-6D8-7 | Sps Technologies, Llc |
3M938-6D8-7 | Sps Technologies, Llc |
3M938-6D8-7 | Fastener Innovation Technology, Inc. |
3M938-6D8-7 | Reid Products Inc. |
3M938-6D8-7 | West Coast Aerospace Inc |
3M938-6D8-7 | Sps Technologies Ltd Tj Brooks |