NSN 5305-01-126-4720
High Torque Screw
Between 1.172 inches and 1.202 inches fastener length, flat countersunk head style, between 0.625 inches and 0.635 inches head diameter, grip diameter: between 0.3115 inches and 0.3120 inches .
Manufacturer part number HT4049-5D13 for national stock number 5305011264720.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-126-4720.
-
MPN or Model
HT4049-5D13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.350 inches and 0.400 inches -
Fastener Length
Between 1.172 inches and 1.202 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.625 inches and 0.635 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.081 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.049 inches first hole and 1.089 inches first hole -
Material
Stainless steel -
Material Specification
23-112 fscm 76301 mfr ref single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-2678 MPN LS15262V4-10Machine Screw
- 5305-00-840-3538 MPN 51B334-4Close Tolerance Screw
- 5305-01-056-2158 MPN BACB30LU2-10Close Tolerance Screw
- 5305-01-103-3242 MPN 3M926-4L15Close Tolerance Screw
- 5305-01-142-8393 MPN HT4049-3-6XShoulder Screw
- 5305-01-256-4466 MPN LD111-0044-0402Close Tolerance Screw
- 5305-01-327-9694 MPN SC3102-4-9AClose Tolerance Screw
- 5305-01-337-6984 MPN HT4075D9-20-91Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-126-4720 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4049-5D13 | Hi-shear Corporation |
HT4049-5D13 | Lisi Aerospace Canada Corp |
HT4049-5D13 | Sps Technologies, Llc |
HT4049-5D13 | Sps Technologies, Llc |
HT4049-5D13 | Arconic Global Fasteners & Rings, |
HT4049-5D13 | Huck International, Inc. |
ST3M714-5D13 | Fastener Innovation Technology, Inc. |
ST3M714-5D13 | Alcoa Global Fasteners, Inc. |
ST3M714-5D13 | Boeing Company, The |
HT4049-5D13 | Alcoa Global Fasteners, Inc. |
HT4049-5D13 | Huck Intl Inc |
10115139 | Nimikkeistokeskus Ncb Finland |