NSN 5305-01-129-2199
High Torque Screw
Between 1.972 inches and 2.002 inches fastener length, flat countersunk head style, between 0.880 inches and 0.890 inches head diameter, grip diameter: between 0.4365 inches and 0.4370 inches .
Manufacturer part number ST3M454-7L21 for national stock number 5305011292199.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-129-2199.
-
MPN or Model
ST3M454-7L21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.650 inches and 0.700 inches -
Fastener Length
Between 1.972 inches and 2.002 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.880 inches and 0.890 inches -
Grip Diameter
Between 0.4365 inches and 0.4370 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.438 inches -
Grip Length
Between 1.302 inches and 1.322 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-047-0369 MPN ST3M506-8-10Shoulder Screw
- 5305-01-103-8820 MPN 3M926-4L9Close Tolerance Screw
- 5305-01-435-3454 MPN BACB30LU7-21Close Tolerance Screw
- 5305-01-478-2832 MPN 3M1170V3-7AClose Tolerance Screw
- 5305-01-512-8306 MPN 3M1170C4-5AFClose Tolerance Screw
- 5306-00-505-9817 MPN J646P18AMachine Bolt
- 5306-00-596-7415 MPN VAL23033-8D73Shear Bolt
- 5306-00-717-7674 MPN VAL21013-12054Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-129-2199 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M454-7L21 | Fastener Innovation Technology, Inc. |
WC4025L-7-21 | West Coast Aerospace Inc |
HT4025L7-21 | Hi-shear Corporation |
HT4025L7-21 | Sps Technologies, Llc |
HT4025L7-21 | Lisi Aerospace Canada Corp |
ST3M454-7L21 | Boeing Company, The |
HT4025L7-21 | Sps Technologies, Llc |
ST3M454-7L21 | Valley-todeco, Inc. |
HT4025L7-21 | Arconic Global Fasteners & Rings, |
ST3M454-7L21 | Heartland Precision Fasteners, Inc. |
HT4025L7-21 | Huck International, Inc. |
ST3M454-7L21 | Houston Precision Fasteners I, Lp |
HT4025L7-21 | Sps Technologies, Llc |
HT4025L7-21 | Sps Technologies, Llc |
11905-7L21 | Reid Products Inc. |
HT4025L7-21 | Sps Technologies Inc |
HT4025L-21 | Bridgeport Brass Co Div National |
10115192 | Nimikkeistokeskus Ncb Finland |