NSN 5305-01-129-9058
High Torque Screw
Furnished with one o-ring.
Manufacturer part number HT4020-5-14A for national stock number 5305011299058.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-129-9058.
-
MPN or Model
HT4020-5-14A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.505 inches and 0.572 inches -
Fastener Length
Between 1.390 inches and 1.437 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.629 inches and 0.634 inches -
Head Height
Between 0.088 inches and 0.090 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-427-6529 MPN ST3M455-5L7-1Close Tolerance Screw
- 5305-01-356-2534 MPN LD111-0047-0507Close Tolerance Screw
- 5305-01-604-9086 MPN 3M1277E8D28AMachine Screw
- 5306-00-338-4104 MPN GB511C-8-29Shear Bolt
- 5306-00-465-3088 MPN STSBG002A07U018Shear Bolt
- 5306-00-933-4973 MPN BACB30LM4U36Shear Bolt
- 5306-01-031-4850 MPN BACB30NF4H17Close Tolerance Bolt
- 5306-01-052-1186 MPN VAL22034-8G26Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-129-9058 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4020-5-14A | Arconic Global Fasteners & Rings, |
HT4020-5-14A | Huck International, Inc. |
HT4020-5-14A | Hi-shear Corporation |
ST3M652C5-14A | Boeing Company, The |
HT4020-5-14A | Sps Technologies, Llc |
HT4020-5-14A | Lisi Aerospace Canada Corp |
HT4020-5-14A | Alcoa Global Fasteners, Inc. |
ST3M652C5-14A | Fastener Innovation Technology, Inc. |
ST3M652C5-14A | West Coast Aerospace Inc |
HT4020-5-14A | Sps Technologies Ltd Tj Brooks |
HT4020-5-14A | Huck Intl Inc |
10130704 | Nimikkeistokeskus Ncb Finland |
HT4020-5-14A | Sps Technologies, Llc |
ST3M652C5-14A | Valley-todeco, Inc. |
ST3M652C5-14A | Houston Precision Fasteners I, Lp |
HT4020-5-14A | Sps Technologies, Llc |
HT4020-5-14A | Sps Technologies, Llc |
11925C5-14A | Reid Products Inc. |