NSN 5305-01-131-2200
High Torque Screw
Between 0.547 inches and 0.577 inches fastener length, fillister countersunk head style, between 0.390 inches and 0.395 inches head diameter, head height: 0.015 inches .
Manufacturer part number HT4041-4-4-5 for national stock number 5305011312200.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-131-2200.
-
MPN or Model
HT4041-4-4-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.287 inches and 0.337 inches -
Fastener Length
Between 0.547 inches and 0.577 inches -
Head Style
Fillister countersunk -
Head Diameter
Between 0.390 inches and 0.395 inches -
Head Height
0.015 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Material Specification
23-112, ty d, fscm 76301 mfr ref single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-302-9731 MPN HT404A5-23Shoulder Screw
- 5305-01-052-5811 MPN 3MFR509Machine Screw
- 5305-01-101-3326 MPN HT4068-4-5AClose Tolerance Screw
- 5305-01-102-0312 MPN HT4068-5-16AClose Tolerance Screw
- 5305-01-136-5749 MPN HT4068-4-2AClose Tolerance Screw
- 5305-01-202-8979 MPN BACB30LK3-7Close Tolerance Screw
- 5305-01-209-7943 MPN HT4059V3-3DShoulder Screw
- 5305-01-297-8234 MPN VT1693AS3-12Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-131-2200 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4041-4-4-5 | Huck International, Inc. |
HT4041-4-4-5 | Arconic Global Fasteners & Rings, |
HT4041-4-4-5 | Hi-shear Corporation |
HT4041-4-4-5 | Sps Technologies, Llc |
3M707-4-4-5 | Boeing Company, The |
HT4041-4-4-5 | Alcoa Global Fasteners, Inc. |
HT4041-4-4-5 | Sps Technologies, Llc |
3M707-4-4-5 | Sps Technologies, Llc |
3M707-4-4-5 | Fastener Innovation Technology, Inc. |
11873-4-4-5 | Reid Products Inc. |
WC4041-4-4-5 | West Coast Aerospace Inc |
3M707-4-4-5 | Alcoa Global Fasteners, Inc. |
HT4041-4-4-5 | Sps Technologies Inc |
HT4041-4-4-5 | Huck Intl Inc |