1-321-802-5889

NSN 5305-01-131-5485

High Torque Screw

About this product

Between 1.098 inches and 1.128 inches fastener length, flat countersunk head style, between 0.464 inches and 0.506 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .

Manufacturer part number ST3M730-4L11 for national stock number 5305011315485.

Datasheet

  • Product description

    Close Tolerance Screw NSN 5305-01-131-5485.

  • MPN or Model

    ST3M730-4L11

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • NMF (National Motor Freight)
    093486 - Bolts, Nuts Or Screws, NOI (sub 3)
  • Unit Weight (Est.)
    0.1 lb
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    Between 0.400 inches and 0.450 inches
  • Fastener Length
    Between 1.098 inches and 1.128 inches
  • Head Style
    Flat countersunk
  • Head Diameter
    Between 0.464 inches and 0.506 inches
  • Grip Diameter
    Between 0.2485 inches and 0.2495 inches
  • Internal Drive Style
    High-torque
  • Thread Diameter
    0.250 inches
  • Grip Length
    Between 0.678 inches and 0.698 inches
  • Thready Qty Per Inch (tpi)
    28
  • Min. Tensile Strength (psi)
    180000 pounds per square inch
  • Hardness Rating
    39.0 rockwell c and 43.0 rockwell c
  • Countersink Angle
    Between 99.0 degrees and 101.0 degrees
  • Surface Finish
    32.0 microinches threads
  • Material
    Steel comp 8740
  • Material Specification
    Mil-s-6049 military specification single material response
  • Surface Treatment
    Aluminum and chromate
  • Surface Treatment Specification
    Mil-c-83488 type 2 class 3 military specification single treatment response
  • Thread Series Designator
    Unjf
More from these suppliers
Close Tolerance Screw

A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Mechanic Bill explains High Torque Screw

Pricing and Availability

Get a quote for 5305-01-131-5485 close tolerance screw
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5305011315485

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
ST3M730-4L11 Boeing Company, The
HT4054-4-11 Sps Technologies, Llc
HT4054-4-11 Alcoa Global Fasteners, Inc.
HT4054-4-11 Hi-shear Corporation
ST3M730-4-11 Boeing Company, The
HT4054-4-11 Huck International, Inc.
HT4054-4-11A Arconic Global Fasteners & Rings,
ST3M730-4L11 Huck International, Inc.
ST3M730-4L11 Fastener Innovation Technology, Inc.
WC405054-4-11A West Coast Aerospace Inc
HT4054-4-11A Hi-shear Corporation
HT4054-4-11A Sps Technologies, Llc
HT4054-4-11A Sps Technologies Ltd Tj Brooks
HT4054-4-11A Lisi Aerospace Canada Corp
HT4054-4-11 Huck Intl Inc
HT4054-4-11 Arconic Global Fasteners & Rings,
ST3M730-4L11 Alcoa Global Fasteners, Inc.
Stock Check
Availability of this NSN has not been updated recently. Submit the pricing and availbility form above to receive an up to date quote.