NSN 5305-01-132-4365
High Torque Screw
Between 0.547 inches and 0.577 inches fastener length, oval countersunk head style, between 0.297 inches and 0.301 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number HT4041-3-5-4 for national stock number 5305011324365.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-132-4365.
-
MPN or Model
HT4041-3-5-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.225 inches and 0.275 inches -
Fastener Length
Between 0.547 inches and 0.577 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.297 inches and 0.301 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Material Specification
23-112 fscm 76301 mfr ref single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-01-027-2006 MPN HT4020-4-10AClose Tolerance Screw
- 5305-01-131-2199 MPN HT4054-3-6AClose Tolerance Screw
- 5305-01-142-7191 MPN HT4041-4-4-5YShoulder Screw
- 5305-01-143-0597 MPN HT4020-5-18AXShoulder Screw
- 5305-01-164-1626 MPN BACB30LU12-54Close Tolerance Screw
- 5305-01-195-0057 MPN SC1786RV3-07LClose Tolerance Screw
- 5305-01-229-1389 MPN HT4075V4-14-58Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-01-132-4365 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4041-3-5-4 | Hi-shear Corporation |
3M707-3-5-4 | Boeing Company, The |
HT4041-3-5-4 | Sps Technologies, Llc |
HT4041-3-5-4 | Alcoa Global Fasteners, Inc. |
3M707-3-5-4 | Arconic Global Fasteners & Rings, |
HT4041-3-5-4 | Huck International, Inc. |
3M707-3-5-4 | Sps Technologies, Llc |
3M707-3-5-4 | Fastener Innovation Technology, Inc. |
11873-3-5-4 | Reid Products Inc. |
3M707-3-5-4 | West Coast Aerospace Inc |
HT4041-3-5-4 | Huck Intl Inc |
10115324 | Nimikkeistokeskus Ncb Finland |
HT4041-3-5-4 | Sps Technologies, Llc |
Stock Check
![](/public/images/partscage_shelf3.png)