NSN 5305-01-133-1573
High Torque Screw
Between 0.547 inches and 0.577 inches fastener length, flat countersunk head style, between 0.297 inches and 0.301 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number HT4041-3-4-5 for national stock number 5305011331573.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-133-1573.
-
MPN or Model
HT4041-3-4-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.287 inches and 0.337 inches -
Fastener Length
Between 0.547 inches and 0.577 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.297 inches and 0.301 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Material Specification
23-112 fscm 76301 mfr ref single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-014-6151 MPN S5008-3-7Close Tolerance Screw
- 5305-01-054-4624 MPN SC1776-7-21Close Tolerance Screw
- 5305-01-158-6253 MPN HT4054-4-12Close Tolerance Screw
- 5305-01-215-6735 MPN HT4008-7-16Shoulder Screw
- 5305-01-346-3763 MPN CHT4068-5-10Close Tolerance Screw
- 5305-01-356-8977 MPN SC3102-3-5Close Tolerance Screw
- 5305-01-359-4725 MPN LE111-0033-0311Machine Screw
- 5305-01-381-1408 MPN SC5053-4-12Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-133-1573 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4041-3-4-5 | Huck International, Inc. |
HT4041-3-4-5 | Arconic Global Fasteners & Rings, |
3M707-3-4-5 | Arconic Global Fasteners & Rings, |
3M707-3-4-5 | Huck International, Inc. |
3M707-3-4-5 | Fastener Innovation Technology, Inc. |
3M707-3-4-5 | Hi-shear Corporation |
3M707-3-4-5 | West Coast Aerospace Inc |
3M707-3-4-5 | Sps Technologies, Llc |
3M707-3-4-5 | Lisi Aerospace Canada Corp |
3M707-3-4-5 | Boeing Company, The |
HT4041-3-4-5 | Sps Technologies, Llc |
HT4041-3-4-5 | Alcoa Global Fasteners, Inc. |
HT4041-3-4-5 | Sps Technologies, Llc |
HT4041-3-4-5 | Hi-shear Corporation |
11873-3-4-5 | Reid Products Inc. |
3M707-3-4-5 | Sps Technologies Ltd Tj Brooks |
3M707-3-4-5 | Sps Technologies Inc |
HT4041-3-4-5 | Huck Intl Inc |
10115342 | Nimikkeistokeskus Ncb Finland |
3M707-3-4-5 | Sps Technologies, Llc |