NSN 5305-01-135-4147
High Torque Screw
Cetyl alcohol lubricatnt.
Manufacturer part number HT4020-3-4 for national stock number 5305011354147.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-135-4147.
-
MPN or Model
HT4020-3-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.380 inches and 0.447 inches -
Fastener Length
Between 0.640 inches and 0.687 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.377 inches and 0.381 inches -
Head Height
Between 0.044 inches and 0.046 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Stainless steel -
Material Specification
23-112 fscm 76301 mfr ref single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-143-2338 MPN 7S14-440-10AMachine Screw
- 5305-00-925-0478 MPN HT403A6-19Machine Screw
- 5305-01-076-4933 MPN ST3M496-5-10Shoulder Screw
- 5305-01-140-3072 MPN HT4041-3-7-5Close Tolerance Screw
- 5305-01-144-4761 MPN HT4016-3-20YShoulder Screw
- 5305-01-183-6973 MPN SC217C06-10Machine Screw
- 5305-01-232-9757 MPN 3M938-4-3-6Close Tolerance Screw
- 5305-01-268-5963 MPN HT4020-4-12YShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-135-4147 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4020-3-4 | Hi-shear Corporation |
HT4020-3-4 | Huck International, Inc. |
HT4020-3-4 | Sps Technologies, Llc |
ST3M652C3-4D | Boeing Company, The |
HT4020-3-4 | Arconic Global Fasteners & Rings, |
ST3M652C3-4D | Alcoa Global Fasteners, Inc. |
HT4020-3-4 | Huck Intl Inc |
HT4020-3-4 | Alcoa Global Fasteners, Inc. |