NSN 5305-01-140-3072
High Torque Screw
Between 0.735 inches and 0.765 inches fastener length, oval countersunk head style, between 0.297 inches and 0.301 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number HT4041-3-7-5 for national stock number 5305011403072.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-140-3072.
-
MPN or Model
HT4041-3-7-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.287 inches and 0.337 inches -
Fastener Length
Between 0.735 inches and 0.765 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.297 inches and 0.301 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-192-0428 MPN HT1029A3-7PClose Tolerance Screw
- 5305-00-505-2636 MPN LS15262V3-9Machine Screw
- 5305-00-965-8171 MPN SC111-10-16Machine Screw
- 5305-01-031-5105 MPN HT409A-4-12Shoulder Screw
- 5305-01-054-6270 MPN VT1694F4-6Close Tolerance Screw
- 5305-01-101-9437 MPN HT4041-3-3-5Close Tolerance Screw
- 5305-01-190-2189 MPN SC2174V08-6Machine Screw
- 5305-01-256-6887 MPN SC1775-6-7Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-140-3072 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4041-3-7-5 | Arconic Global Fasteners & Rings, |
HT4041-3-7-5 | Huck International, Inc. |
HT4041-3-7-5 | Hi-shear Corporation |
HT4041-3-7-5 | Sps Technologies, Llc |
HT4041-3-7-5 | Lisi Aerospace Canada Corp |
3M707-3-7-5 | Boeing Company, The |
3M707-3-7-5 | Sps Technologies, Llc |
3M707-3-7-5 | Fastener Innovation Technology, Inc. |
11873-3-7-5 | Reid Products Inc. |
3M707-3-7-5 | Alcoa Global Fasteners, Inc. |
HT4041-3-7-5 | Huck Intl Inc |
10115411 | Nimikkeistokeskus Ncb Finland |
HT4041-3-7-5 | Alcoa Global Fasteners, Inc. |
HT4041-3-7-5 | Sps Technologies, Llc |