NSN 5305-01-149-1942
High Torque Screw
Internal drive ribbed.
Manufacturer part number SC1777-08-7 for national stock number 5305011491942.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-149-1942.
-
MPN or Model
SC1777-08-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.313 inches and 0.363 inches -
Fastener Length
Between 0.760 inches and 0.790 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.294 inches and 0.332 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-00-809-1747 MPN 51B334-10Machine Screw
- 5305-01-038-9555 MPN BACB30LH3-5Close Tolerance Screw
- 5305-01-047-1069 MPN HT4011-5-17Socket Head Cap Screw
- 5305-01-054-6258 MPN VT1694F3-11Close Tolerance Screw
- 5305-01-056-4415 MPN C7984-3-2Close Tolerance Screw
- 5305-01-076-4930 MPN HT4020-4-9AXShoulder Screw
- 5305-01-103-1766 MPN HT4072-4-6-7Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-149-1942 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SC1777-08-7 | Arconic Global Fasteners & Rings, |
PBF1356A08-7 | Sps Technologies, Llc |
HR216-08-7 | Hi-shear Corporation |
122967A08-7 | Sps Technologies, Llc |
HR216-08-7 | Lisi Aerospace Canada Corp |
GB510CH08-7 | Northrop Grumman Systems Corporation |
122967A08-7 | Sps Technologies, Llc |
MATF111A08-7 | Abounding Security Inc |