NSN 5306-01-078-5979
Close Tolerance Hex Head Bolt
Between 1.911 inches and 1.941 inches fastener length, double hexagon w/hole head style, 0.348 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number BM3326-5-22 for national stock number 5306010785979.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-078-5979.
-
MPN or Model
BM3326-5-22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.536 inches and 0.566 inches -
Fastener Length
Between 1.911 inches and 1.941 inches -
Head Style
Double hexagon w/hole -
Head Height
0.348 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Extended Washer Diameter
Between 0.521 inches and 0.531 inches -
Extended Washer Thickness
0.082 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
1.375 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
50.0 rockwell c -
Surface Finish
32.0 microinches threads -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 type 1 or type 2 or type 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-2616 MPN LS15262V06-8Machine Screw
- 5305-01-173-3598 MPN LD111-0044-2408Close Tolerance Screw
- 5305-01-349-9582 MPN GB510FG6-18Close Tolerance Screw
- 5305-01-412-5356 MPN LD111-0045-2516Close Tolerance Screw
- 5305-01-414-5135 MPN BACB30JQ10-21Shoulder Screw
- 5305-01-435-3850 MPN BACB30LU7-35Close Tolerance Screw
- 5306-00-131-7221 MPN MS21250-05056Shear Bolt
- 5306-00-211-8397 MPN BACB30FD16-24Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-078-5979 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BM3326-5-22 | Huck International, Inc. |
S371-5-22 | Huck International, Inc. |
VS3060-5-22 | Arconic Global Fasteners & Rings, |
ST3M571-5-22 | Boeing Company, The |
MB84-5-22 | Hi-shear Corporation |
74328-5-22 | Sps Technologies, Llc |
MB84-5-22 | Lisi Aerospace Canada Corp |
VAL23033-5-22 | Valley-todeco, Inc. |
AIC752-5-22 | Sps Technologies, Llc |
ST3M571-5-22 | Sps Technologies, Llc |
S11-1059-5-22 | Sonic Industries Inc. |
642AS0735-5 | Naval Air Systems Command |
BM3326-5-22 | Huck Intl Inc |
S371-5-22 | Huck Intl Inc |
74328-5-22 | Sps Technologies, Llc |
VS3060-5-22 | Alcoa Global Fasteners, Inc. |
ST3M571-5-22 | Fastener Innovation Technology, Inc. |
GS1030-5-22 | B & B Specialties Inc. |