NSN 5305-01-152-4225
High Torque Screw
Between 1.535 inches and 1.545 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, locking feature: detent ball grip.
Manufacturer part number AS221-04-0900 for national stock number 5305011524225.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-152-4225.
-
MPN or Model
AS221-04-0900
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.525 inches and 0.595 inches -
Fastener Length
Between 1.535 inches and 1.545 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.2480 inches and 0.2492 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.890 inches and 0.910 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
150000 pounds per square inch -
Countersink Angle
100.0 degrees -
Material
Steel comp 630 -
Material Specification
Ams 5643 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1680-01-535-6800 MPN CA17247-6-9-1 Two Lug Receptacle
- 5305-00-409-4480 MPN CA29040-06-2-5SMachine Screw
- 5305-01-094-6060 MPN CA2658-4-97Close Tolerance Screw
- 5305-01-551-8970 MPN CA22062-10-14-13Flush Captive Screw
- 5305-00-121-8885 MPN AS195-4-13Close Tolerance Screw
- 5306-00-003-4109 MPN AC194-5-28Close Tolerance Bolt
- 5306-01-442-1134 MPN SS5211-12H26Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-152-4225 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AS221-04-0900 | Avibank Mfg., Inc. |
CA2755-4-0900 | Arconic Global Fasteners & Rings, |