NSN 5305-01-159-1294
High Torque Screw
Between 0.952 inches and 0.982 inches fastener length, oval countersunk head style, between 0.469 inches and 0.473 inches head diameter, grip diameter: between 0.3115 inches and 0.3120 inches .
Manufacturer part number HT4016-5-8 for national stock number 5305011591294.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-159-1294.
-
MPN or Model
HT4016-5-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.442 inches and 0.492 inches -
Fastener Length
Between 0.952 inches and 0.982 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.469 inches and 0.473 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-557-8239 MPN VT1051-4-6Close Tolerance Screw
- 5305-00-823-5809 MPN NAS1102-06-14Machine Screw
- 5305-00-935-7580 MPN H804-632-16Machine Screw
- 5305-00-971-7499 MPN C082-3-4Machine Screw
- 5305-00-971-7536 MPN C082-4-7Machine Screw
- 5305-01-303-6352 MPN SC1823-3-6Close Tolerance Screw
- 5305-01-330-3395 MPN SC3102-4-19AClose Tolerance Screw
- 5305-01-435-5528 MPN BACB30LU8-23Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-159-1294 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4016-5-8 | Huck International, Inc. |
HT4016-5-8 | Arconic Global Fasteners & Rings, |
HT4016-5-8 | Hi-shear Corporation |
HT4016-5-8 | Sps Technologies, Llc |
ST3M506-5-B | Boeing Company, The |
HT4016-5-8 | Lisi Aerospace Canada Corp |
11919-5-B | Reid Products Inc. |
HT4016-5-8 | Huck Intl Inc |
HT4016-5-8 | Alcoa Global Fasteners, Inc. |
HT4016-5-8 | Sps Technologies, Llc |