NSN 5305-01-160-0336
High Torque Screw
Between 1.435 inches and 1.455 inches fastener length, crowned hexagon head style, between 0.095 inches and 0.110 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number MS3369B-317 for national stock number 5305011600336.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-160-0336.
-
MPN or Model
MS3369B-317
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.263 inches and 0.314 inches -
Fastener Length
Between 1.435 inches and 1.455 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.095 inches and 0.110 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.1889 inches and 0.1894 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.190 inches -
Grip Length
Between 1.062 inches and 1.078 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
63000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.345 inches first hole and 1.365 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5945-01-033-5055 MPN BR12K4KB14-26VElectromagnetic Relay
- 5940-01-447-2950 MPN NAS1063C3-504BETerminal Board Marker Strip
- 5940-01-384-3892 MPN NAS1063A8TB98TTerminal Board Marker Strip
- 5305-00-051-2335 MPN NASM51958Machine Screw
- 5305-00-052-7482 MPN MS35198-84Machine Screw
- 5305-00-144-8295 MPN MS24693-1BMachine Screw
- 5305-00-170-2942 MPN NAS1580A3H4DClose Tolerance Screw
- 5305-00-205-3918 MPN MS27039-8-10Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-160-0336 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS3369B-317 | Military Standards |
NASM3369 | National Aerospace Standards |
NASM3369B-317 | National Aerospace Standards |