NSN 5305-01-160-6837
High Torque Screw
Internal drive ribbed.
Manufacturer part number NAS1580A3R6 for national stock number 5305011606837.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-160-6837.
-
MPN or Model
NAS1580A3R6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.338 inches and 0.388 inches -
Fastener Length
Between 0.848 inches and 0.878 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 or steel comp 4340 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5935-00-400-4774 MPN NAS1668-3Electrical Connector End Seal Plug
- 5940-01-384-3955 MPN NAS1063A20TB42CTerminal Board Marker Strip
- 5305-00-007-2955 MPN NAS1743C4T12USocket Head Cap Screw
- 5305-00-008-3701 MPN NAS1122-9Close Tolerance Screw
- 5305-00-052-6920 MPN MS24629-56Tapping Screw
- 5305-00-052-7431 MPN MS35198-95Machine Screw
- 5305-00-054-5651 MPN MS51957-17Machine Screw
- 5305-00-057-0488 MPN MS24694S1Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-160-6837 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580A3R6 | National Aerospace Standards |
NAS1580A3R6 | Aerea Spa |
NAS1580A3R6 | National Aerospace Standards |
NAS1580A3R6 | Aerea Spa |
NAS1580A3R6 | National Aerospace Standards |
NAS1580A3R6 | Aerea Spa |
NAS1580A3R6 | National Aerospace Standards |
NAS1580A3R6 | Aerea Spa |