NSN 5305-01-163-5792
High Torque Screw
Retaining element in shank.
Manufacturer part number MS3369B625 for national stock number 5305011635792.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-163-5792.
-
MPN or Model
MS3369B625
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.352 inches and 0.403 inches -
Fastener Length
Between 2.101 inches and 2.121 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.189 inches and 0.204 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.3737 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.375 inches -
Grip Length
Between 1.562 inches and 1.578 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
63000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.973 inches first hole and 1.993 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5930-00-057-0378 MPN MS25308-292Toggle Switch
- 5935-00-068-8030 MPN 67-01C18-64PElectrical Plug Connector
- 5945-00-089-1252 MPN MS25329-A1Electromagnetic Relay
- 5935-00-119-9049 MPN MS17346R24C28PWElectrical Receptacle Connector
- 5930-00-147-0844 MPN MS16109-30-4-6NRotary Switch
- 5935-00-148-9378 MPN MS3456W14S-7SCElectrical Plug Connector
- 5935-00-154-0098 MPN MS27508E20B39PElectrical Receptacle Connector
- 5935-00-171-0142 MPN MS27484T24A2SElectrical Plug Connector
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-163-5792 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS3369B625 | Military Standards |