NSN 5305-01-163-5797
High Torque Screw
Internal drive ribbed.
Manufacturer part number NAS1580A3R8 for national stock number 5305011635797.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-163-5797.
-
MPN or Model
NAS1580A3R8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.338 inches and 0.388 inches -
Fastener Length
Between 0.848 inches and 0.878 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5305-00-007-9894 MPN NAS1102E04-10PMachine Screw
- 5305-00-052-5918 MPN MS35198-63Machine Screw
- 5305-00-167-2179 MPN NAS1351C3LE12Socket Head Cap Screw
- 5305-00-186-9234 MPN NAS1352-02LL4PSocket Head Cap Screw
- 5305-00-205-3917 MPN MS27039-8-08Machine Screw
- 5305-00-237-6487 MPN NAS604-16PMachine Screw
- 5305-00-253-5627 MPN MS21318-48Drive Screw
- 5305-00-269-4208 MPN MS24694S150Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-163-5797 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580A3R8 | National Aerospace Standards |