NSN 5305-01-164-9729
High Torque Screw
Between 2.461 inches and 2.508 inches fastener length, flat countersunk head style, between 0.826 inches and 0.888 inches head diameter, grip diameter: between 0.7782 inches and 0.7784 inches .
Manufacturer part number SC1779-7-29D for national stock number 5305011649729.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-164-9729.
-
MPN or Model
SC1779-7-29D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.639 inches and 0.706 inches -
Fastener Length
Between 2.461 inches and 2.508 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.826 inches and 0.888 inches -
Grip Diameter
Between 0.7782 inches and 0.7784 inches -
Shank Unthreaded Hole Diameter
0.096 inches first hole and 0.116 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.438 inches -
Grip Length
Between 1.802 inches and 1.822 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.153 inches first hole -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium or cadmium and chromate -
Surface Treatment Specification
Nas672 assn standard 1st treatment response or mil-c-8837, type 2, cl 3 military specification 2nd treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-486-1154 MPN ST3M466V7L8-1Close Tolerance Screw
- 5305-00-492-9098 MPN SC2000B1032-16Machine Screw
- 5305-00-505-2802 MPN LS15267V3-50Machine Screw
- 5305-00-557-8239 MPN VT1051-4-6Close Tolerance Screw
- 5305-00-595-5986 MPN GB510DC4C5DClose Tolerance Screw
- 5305-00-805-3839 MPN 51B221-9HMachine Screw
- 5305-00-882-1106 MPN 3MA334FA21Machine Screw
- 5305-00-928-2348 MPN C079-4-10Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-164-9729 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SC1779-7-29D | Arconic Global Fasteners & Rings, |
PBF1202-7-29D | Sps Technologies, Llc |
HR204-7-29D | Hi-shear Corporation |
106706T-7-29D | Sps Technologies, Llc |
HR204-7-29D | Lisi Aerospace Canada Corp |
GB510CE7-29D | Northrop Grumman Systems Corporation |
GB510FD7-29D | Northrop Grumman Systems Corporation |
106706T-7-29D | Sps Technologies, Llc |