NSN 5305-01-165-3314
High Torque Screw
Between 0.735 inches and 0.765 inches fastener length, oval countersunk head style, between 0.390 inches and 0.395 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number HT4041-4-7-5 for national stock number 5305011653314.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-165-3314.
-
MPN or Model
HT4041-4-7-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.287 inches and 0.337 inches -
Fastener Length
Between 0.735 inches and 0.765 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.390 inches and 0.395 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-435-1058 MPN VT1040-3-12Close Tolerance Screw
- 5305-00-484-1957 MPN LS15265V4-26Close Tolerance Screw
- 5305-00-915-4765 MPN VT1040-3-9Machine Screw
- 5305-01-007-8758 MPN HT8137-3-2ASClose Tolerance Screw
- 5305-01-126-2325 MPN ST3M455-4DL14-1Close Tolerance Screw
- 5305-01-135-6493 MPN HT4054-3-3AClose Tolerance Screw
- 5305-01-194-9193 MPN HT4020-5-8AXShoulder Screw
- 5305-01-327-9687 MPN SC3102-4-4AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-165-3314 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4041-4-7-5 | Arconic Global Fasteners & Rings, |
3M707-4-7-5 | Fastener Innovation Technology, Inc. |
WC4041-4-7-5 | West Coast Aerospace Inc |
HT4041-4-7-5 | Hi-shear Corporation |
HT4041-4-7-5 | Sps Technologies, Llc |
HT4041-4-7-5 | Huck International, Inc. |
HT4041-4-7-5 | Lisi Aerospace Canada Corp |
3M707-4-7-5 | Boeing Company, The |
11873-4-7-5 | Reid Products Inc. |
HT4041-4-7-5 | Sps Technologies Ltd Tj Brooks |
HT4041-4-7-5 | Huck Intl Inc |
10115502 | Nimikkeistokeskus Ncb Finland |
HT4041-4-7-5 | Alcoa Global Fasteners, Inc. |
HT4041-4-7-5 | Sps Technologies, Llc |