NSN 5305-01-165-7515
High Torque Screw
Between 1.189 inches and 1.219 inches fastener length, flat countersunk head style, between 0.698 inches and 0.762 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number AIC984-6-12 for national stock number 5305011657515.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-165-7515.
-
MPN or Model
AIC984-6-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.267 inches and 0.317 inches -
Fastener Length
Between 1.189 inches and 1.219 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.698 inches and 0.762 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-058-0795 MPN NAS1102-06-7Machine Screw
- 5305-00-144-9509 MPN SK2015-386Machine Screw
- 5305-00-163-9793 MPN SK2015-129Machine Screw
- 5305-00-834-3502 MPN NAS1101-3-32Machine Screw
- 5305-00-913-7841 MPN NAS1101-3H20Machine Screw
- 5305-00-971-7499 MPN A1C82-3-4Machine Screw
- 5305-01-069-2728 MPN NAS1101E3-12Machine Screw
- 5305-01-075-3856 MPN NAS1101-02-7Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-165-7515 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC984-6-12 | Sps Technologies, Llc |
11044-6-12 | Huck International, Inc. |
AIC984-6-12P | Sps Technologies, Llc |
VT1693F6-12 | Arconic Global Fasteners & Rings, |
PBF1165-6-12 | Sps Technologies, Llc |
121557-6-12 | Sps Technologies, Llc |
VT1693F6-12 | Alcoa Global Fasteners, Inc. |
C7984-6-12 | Lockheed Martin Corporation |
11044-6-12 | Huck Intl Inc |