NSN 5305-01-167-2408
High Torque Screw
Between 1.734 inches and 1.781 inches fastener length, flat countersunk head style, between 0.578 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number 51B335-22 for national stock number 5305011672408.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-167-2408.
-
MPN or Model
51B335-22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.349 inches and 0.416 inches -
Fastener Length
Between 1.734 inches and 1.781 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.578 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Countersink Angle
Between 70.0 degrees and 130.0 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-5626 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-143-1854 MPN 202-15522-7-15Close Tolerance Screw
- 5305-00-331-4778 MPN AIC812-08-10Machine Screw
- 5305-00-460-3041 MPN AIC84-3-6Machine Screw
- 5305-00-470-8185 MPN AIC82-4-19Close Tolerance Screw
- 5305-00-840-5962 MPN AIC617-1Externally Relieved Body Screw
- 5305-01-057-0343 MPN BACB30LU5-5Close Tolerance Screw
- 5305-01-259-7002 MPN AIC984-3-4PRClose Tolerance Screw
- 5305-01-352-1215 MPN AIC4410-4-14Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-167-2408 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B335-22 | Northrop Grumman Technical Services, |
51B335-22 | Huck International, Inc. |
51B335-22 | Sps Technologies, Llc |
51B335-22 | Arconic Global Fasteners & Rings, |
51B335-22 | Sps Technologies, Llc |
51B335-22 | Hi-shear Corporation |
51B335-22 | Sps Technologies, Llc |
51B335-22 | Alcoa Global Fasteners, Inc. |
51B335-22 | Lisi Aerospace Canada Corp |
51B335-22 | Huck Intl Inc |
51B335-22 | Northrop Grumman Systems Corporation |