NSN 5305-01-169-0014
High Torque Screw
Between 0.691 inches and 0.721 inches fastener length, oval countersunk head style, 0.303 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number LD111-0047-2306 for national stock number 5305011690014.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-169-0014.
-
MPN or Model
LD111-0047-2306
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.306 inches and 0.356 inches -
Fastener Length
Between 0.691 inches and 0.721 inches -
Head Style
Oval countersunk -
Head Diameter
0.303 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
30.0 rockwell c and 45.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-338-9348 MPN BACB30NN4S17Close Tolerance Screw
- 5305-01-435-3458 MPN BACB30LU7-22Close Tolerance Screw
- 5305-01-462-2675 MPN 3M1169V3-11AClose Tolerance Screw
- 5306-00-505-9885 MPN J646P14AMachine Bolt
- 5306-00-782-8250 MPN BACB30GT8-31Shear Bolt
- 5306-01-043-5721 MPN VEP220121-5VH12Shear Bolt
- 5306-01-054-3405 MPN C7521-4D5Shear Bolt
- 5306-01-123-9781 MPN VEP220221-8F15Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-169-0014 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0047-2306 | Boeing Company, The |
LD111-0047-2306 | Valley-todeco, Inc. |
LD111-0047-2306 | Sps Technologies, Llc |
LD111-0047-2306 | J.w. Manufacturing, Inc |
LD111-0047-2306 | Sps Technologies, Llc |
LD111-0047-2306 | Sonic Industries Inc. |
LD111-0047-2306 | Abounding Security Inc |
LD111-0047-2306 | Hi-shear Corporation |
LD111-0047-2306 | Sps Technologies, Llc |