1-321-802-5889

NSN 5305-01-169-0016

High Torque Screw

About this product

Between 0.694 inches and 0.724 inches fastener length, flat countersunk head style, between 0.464 inches and 0.507 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .

Manufacturer part number LD111-0044-2405 for national stock number 5305011690016.

Datasheet

  • Product description

    Close Tolerance Screw NSN 5305-01-169-0016.

  • MPN or Model

    LD111-0044-2405

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • NMF (National Motor Freight)
    093486 - Bolts, Nuts Or Screws, NOI (sub 3)
  • Unit Weight (Est.)
    0.1 lb
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    Between 0.372 inches and 0.422 inches
  • Fastener Length
    Between 0.694 inches and 0.724 inches
  • Head Style
    Flat countersunk
  • Head Diameter
    Between 0.464 inches and 0.507 inches
  • Grip Diameter
    Between 0.2490 inches and 0.2495 inches
  • Internal Drive Style
    Offset cruciform (torque set)
  • Thread Diameter
    0.250 inches
  • Grip Length
    Between 0.302 inches and 0.322 inches
  • Thready Qty Per Inch (tpi)
    28
  • Countersink Angle
    Between 99.0 degrees and 101.0 degrees
  • Material
    Steel comp xm-13
  • Material Specification
    Ams 5629 ph13-8 assn standard single material response
  • Surface Treatment
    Passivate
  • Surface Treatment Specification
    Qq-p-35 federal specification single treatment response
  • Thread Series Designator
    Unjf
More from these suppliers
Close Tolerance Screw

A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Mechanic Bill explains High Torque Screw

Pricing and Availability

Get a quote for 5305-01-169-0016 close tolerance screw
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5305011690016

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
LD111-0044-2405 Boeing Company, The
LD111-044-2405 Sps Technologies, Llc
LD111-044-2405 Valley-todeco, Inc.
LD111-044-2405 Arconic Global Fasteners & Rings,
LD111-044-2405 Huck International, Inc.
LD111-044-2405 J.w. Manufacturing, Inc
LD111-044-2405 Sps Technologies, Llc
LD111-044-2405 Sps Technologies, Llc
LD111-044-2405 Sonic Industries Inc.
LD111-044-2405 Hi-shear Corporation
LD111-044-2405 Sps Technologies, Llc
LD111-044-2405 Lisi Aerospace Canada Corp
123256-4R05 Sps Technologies, Llc
Stock Check
Availability for this item was last checked on 03/22/24. The quantities and conditions available at the time were:
  • NE: 1322
  • NS: 404