NSN 5305-01-170-6200
High Torque Screw
Internal drive ribbed.
Manufacturer part number NAS1580V5R8 for national stock number 5305011706200.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-170-6200.
-
MPN or Model
NAS1580V5R8
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.476 inches and 0.526 inches -
Fastener Length
Between 0.986 inches and 1.016 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.578 inches and 0.633 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy -
Material Specification
Ams4967 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5935-01-218-3818 MPN NAS1692G10T5P6Electrical Receptacle Connector
- 1680-01-546-1239 MPN NAS1711D15-76TWebbing Strap
- 5940-01-451-4414 MPN NAS1063A20-500BBTerminal Board Marker Strip
- 5305-00-016-8257 MPN MS16996-39Socket Head Cap Screw
- 5305-00-057-0491 MPN MS24694S5Machine Screw
- 5305-00-057-0499 MPN MS51958-3Machine Screw
- 5305-00-069-5584 MPN MS90725-100Hexagon Head Cap Screw
- 5305-00-071-8889 MPN NASM7839Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-170-6200 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580V5R8 | National Aerospace Standards |
NAS1580V5T8 | National Aerospace Standards |