NSN 5305-01-173-3597
High Torque Screw
Intermal drive ribbed.
Manufacturer part number LD111-0044-2305 for national stock number 5305011733597.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-173-3597.
-
MPN or Model
LD111-0044-2305
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.306 inches and 0.356 inches -
Fastener Length
Between 0.628 inches and 0.658 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-512-8295 MPN 3M1170C5-20AClose Tolerance Screw
- 5306-01-010-2346 MPN VEP220121-6F-17Shear Bolt
- 5306-01-043-5711 MPN VAL22034-8FS16Shear Bolt
- 5306-01-057-5989 MPN VFK101G5-010Shear Bolt
- 5306-01-060-6842 MPN VCG3339-6DN22Close Tolerance Bolt
- 5306-01-224-0559 MPN VCC0020-C10-36Machine Bolt
- 5306-01-338-0899 MPN BACB30US8-14Shear Bolt
- 5306-01-343-8815 MPN VCG0027-8-39Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-173-3597 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0044-2305 | Boeing Company, The |
LD111-0044-2305 | Sps Technologies, Llc |
LD511-0044-2305 | Valley-todeco, Inc. |
LD111-0044-2305 | Arconic Global Fasteners & Rings, |
LD111-0044-2305 | Huck International, Inc. |
LD111-0044-2305 | J.w. Manufacturing, Inc |
LD111-0044-2305 | Sps Technologies, Llc |
LD111-0044-2305 | Sps Technologies, Llc |
LD111-0044-2305 | Sonic Industries Inc. |
LD111-0044-2305 | Hi-shear Corporation |
LD111-0044-2305 | Sps Technologies, Llc |
LD111-0044-2305 | Lisi Aerospace Canada Corp |
LD111-0044-2305 | Valley-todeco, Inc. |