NSN 5305-01-173-3599
High Torque Screw
Internal drive ribbed.
Manufacturer part number LD111-0044-2409 for national stock number 5305011733599.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-173-3599.
-
MPN or Model
LD111-0044-2409
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.372 inches and 0.422 inches -
Fastener Length
Between 0.944 inches and 0.974 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-3007 MPN LS15264V06-7Machine Screw
- 5305-01-032-3465 MPN LS15264-06-7Machine Screw
- 5305-01-240-5184 MPN 3M925C3-19AClose Tolerance Screw
- 5305-01-512-8411 MPN 3M1170D3-5AFClose Tolerance Screw
- 5306-00-205-3521 MPN VFK100G-05052Shear Bolt
- 5306-00-847-5284 MPN 3M33-3-9AMachine Bolt
- 5306-01-046-0523 MPN VAL23608-9D19Shoulder Bolt
- 5306-01-331-7555 MPN VCG0016-7-31PShear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-173-3599 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0044-2409 | Boeing Company, The |
LD111-0044-2409 | Sps Technologies, Llc |
LD111-0044-2409 | Arconic Global Fasteners & Rings, |
LD111-0044-2409 | Sps Technologies, Llc |
LD111-0044-2409 | Sps Technologies, Llc |
LD111-0044-2409 | Sonic Industries Inc. |
LD111-0044-2409 | Hi-shear Corporation |
LD111-0044-2409 | Lisi Aerospace Canada Corp |
LD111-0044-2409 | Valley-todeco, Inc. |
LD111-0044-2409 | Sps Technologies, Llc |