NSN 5305-01-174-2897
High Torque Screw
Internal drive ribbed.
Manufacturer part number NAS1581K4R12 for national stock number 5305011742897.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-174-2897.
-
MPN or Model
NAS1581K4R12
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.332 inches and 0.403 inches -
Fastener Length
Between 1.143 inches and 1.163 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.350 inches and 0.399 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy -
Material Specification
Ams 4967 comp 6al-4v assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1581 professional/industrial association standard
More from these suppliers
- 5935-01-513-0334 MPN 5A088Electrical Receptacle Connector
- 1560-01-652-3629 MPN NAS1834-3-750Aircraft Structural Panel
- 5305-00-003-6708 MPN NAS1096-1-13Machine Screw
- 5305-00-006-8306 MPN NAS1100E06-4PMachine Screw
- 5305-00-052-5967 MPN MS35202-12Machine Screw
- 5305-00-060-9740 MPN MS21262-36Socket Head Cap Screw
- 5305-00-068-8432 MPN MS24667-10Socket Head Cap Screw
- 5305-00-145-1009 MPN NAS1100C06-12BMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-174-2897 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581K4R12 | National Aerospace Standards |
NAS1581V4R12 | National Aerospace Standards |