NSN 5305-01-177-9733
High Torque Screw
Internal drive ribbed.
Manufacturer part number LD111-0044-0817 for national stock number 5305011779733.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-177-9733.
-
MPN or Model
LD111-0044-0817
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.634 inches and 0.664 inches -
Fastener Length
Between 1.696 inches and 1.726 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.951 inches and 1.039 inches -
Grip Diameter
Between 0.4990 inches and 0.4995 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.500 inches -
Grip Length
1.062 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-447-6111 MPN 265-522083-11Bell Crank
- 1680-00-606-8628 MPN 265-522115-2Bell Crank
- 5935-00-687-1975 MPN 105-193-15Electrical Receptacle Connector
- 4820-00-818-8966 MPN 2V6-32Restrictor Check Valve
- 4920-01-155-2329 MPN R-TBD-275Electronic Systems Test Set
- 1560-01-160-9280 MPN L3053723-001Aircraft Structural Panel
- 1680-01-162-6704 MPN L5223007-001Pitch Control Pull Rod
- 4820-01-167-2719 MPN LE284/0001/0002Check Valve
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-177-9733 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0044-0817 | Boeing Company, The |