NSN 5305-01-180-2540
High Torque Screw
Between 4.007 inches and 4.037 inches fastener length, flat countersunk head style, between 0.4640 inches and 0.5066 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number LD111-0044-0458 for national stock number 5305011802540.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-180-2540.
-
MPN or Model
LD111-0044-0458
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.372 inches and 0.422 inches -
Fastener Length
Between 4.007 inches and 4.037 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.4640 inches and 0.5066 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 3.615 inches and 3.635 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-054-4631 MPN BACB30LU2-1Close Tolerance Screw
- 5305-01-217-2922 MPN BACB30LU4-20XShoulder Screw
- 5305-01-512-8353 MPN 3M1170D3-6AFClose Tolerance Screw
- 5305-01-600-8256 MPN PMT1123-2Close Tolerance Screw
- 5306-00-526-3922 MPN J815P034AClose Tolerance Bolt
- 5306-01-010-2346 MPN VEP220121-6F-17Shear Bolt
- 5306-01-012-0621 MPN VAL23001-7-D038Shear Bolt
- 5306-01-046-5296 MPN VAL23608-5D16Shoulder Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-180-2540 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0044-0458 | Boeing Company, The |
LD111-0044-0458 | Sps Technologies, Llc |
LD111-0044-0458 | Valley-todeco, Inc. |
LD111-0044-0458 | J.w. Manufacturing, Inc |
LD111-0044-0458 | Sps Technologies, Llc |
LD111-0044-0458 | Sps Technologies, Llc |
LD111-0044-0458 | Shop Vac Corporation |
LD111-0044-0458 | Hi-shear Corporation |
LD111-0044-0458 | Sps Technologies, Llc |
LD111-0044-0458 | Lisi Aerospace Canada Corp |
LD111-044-0458 | Arconic Global Fasteners & Rings, |
LD111-0029-0458 | Boeing Company, The |
LD111-0044-0458 | Reid Products Inc. |