NSN 5305-01-182-7676
High Torque Screw
Between 0.449 inches and 0.479 inches fastener length, flat countersunk head style, between 0.297 inches and 0.302 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number HT4048-3D3 for national stock number 5305011827676.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-182-7676.
-
MPN or Model
HT4048-3D3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.449 inches and 0.479 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.297 inches and 0.302 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.075 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.336 inches first hole and 0.346 inches first hole -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-017-5131 MPN 3M123-3-6Close Tolerance Screw
- 5305-00-395-3437 MPN HT4024L5-14-1Close Tolerance Screw
- 5305-00-508-2704 MPN LS15262V04-4Machine Screw
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-00-764-3035 MPN HT403A6-12Machine Screw
- 5305-01-049-4057 MPN BACB30LH4-18Close Tolerance Screw
- 5305-01-056-5451 MPN BACB30LK3-8Close Tolerance Screw
- 5305-01-104-1066 MPN 3M926-3L8Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-182-7676 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4048-3D3 | Huck International, Inc. |
HT4048-3D3 | Arconic Global Fasteners & Rings, |
ST3M713-3D3 | Boeing Company, The |
ST3M713-3D3 | Sps Technologies, Llc |
ST3M713-3D3 | Alcoa Global Fasteners, Inc. |
ST3M713-3D3-1 | Boeing Company, The |
HT4048-3D3 | Hi-shear Corporation |
HT4048-3D3 | Sps Technologies, Llc |
HT4048-3D3 | Lisi Aerospace Canada Corp |
HT4048-3D3 | Huck Intl Inc |
HT4048-3D3 | Alcoa Global Fasteners, Inc. |
HT4048-3D3 | Sps Technologies, Llc |