NSN 5305-01-185-8047
High Torque Screw
Between 0.676 inches and 0.706 inches fastener length, flat countersunk head style, between 0.350 inches and 0.399 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number BACB30EL4CN6 for national stock number 5305011858047.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-185-8047.
-
MPN or Model
BACB30EL4CN6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 0.676 inches and 0.706 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.350 inches and 0.399 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 or steel comp 4130 -
Surface Treatment
Nickel and cadmium -
Surface Treatment Specification
Ams 2416 assn standard single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-417-5005 MPN FH399-0440-6CBMachine Screw
- 5305-00-809-1505 MPN 53B333-10Close Tolerance Screw
- 5305-00-814-5939 MPN HT1029A3-2Close Tolerance Screw
- 5305-01-025-6964 MPN HT4017-08-7Close Tolerance Screw
- 5305-01-054-6255 MPN SC1776-7-9Close Tolerance Screw
- 5305-01-076-6316 MPN HT4020-3-8AClose Tolerance Screw
- 5305-01-193-1905 MPN HT8137-6-9ASClose Tolerance Screw
- 5305-01-364-8276 MPN BACS12FA3K5Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-185-8047 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30EL4CN6 | Huck International, Inc. |
BACB30EL4CN6 | Hi-shear Corporation |
BACB30EL4CN6 | Lisi Aerospace Canada Corp |
BACB30EL4CN6 | The Boeing Company |
BACB30EL4CN6 | Alcoa Global Fasteners, Inc. |
BACB30EL4CN6 | Arconic Global Fasteners & Rings, |
BACB30EL4CN6 | Sps Technologies, Llc |
BACB30EL4CN6 | Huck Intl Inc |
BACB30EL4CN6 | Sps Technologies, Llc |