NSN 5305-01-185-8678
High Torque Screw
Between 1.516 inches and 1.546 inches fastener length, flat countersunk head style, between 0.575 inches and 0.635 inches head diameter, grip diameter: between 0.3115 inches and 0.3120 inches .
Manufacturer part number HT4025L5-16 for national stock number 5305011858678.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-185-8678.
-
MPN or Model
HT4025L5-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.531 inches -
Fastener Length
Between 1.516 inches and 1.546 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.575 inches and 0.635 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-298-3152 MPN HT8076-4-18Close Tolerance Screw
- 5305-00-505-2707 MPN LS15266V4-7Close Tolerance Screw
- 5305-00-638-5031 MPN E1622M1-1Externally Relieved Body Screw
- 5305-00-786-7559 MPN 51B334-2Machine Screw
- 5305-00-971-7539 MPN C082-5-13Machine Screw
- 5305-01-054-2535 MPN BACB30LK06-4Close Tolerance Screw
- 5305-01-142-9414 MPN HT4009-6-13Shoulder Screw
- 5305-01-143-1754 MPN HT4009-5-21Shoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-185-8678 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4025L5-16 | Arconic Global Fasteners & Rings, |
HT4025L5-16 | Huck International, Inc. |
HT4025L5-16 | Hi-shear Corporation |
HT4025L5-16 | Sps Technologies, Llc |
HT4025L5-16 | Lisi Aerospace Canada Corp |
ST3M454-5L16 | Boeing Company, The |
HT4025L5-16 | Alcoa Global Fasteners, Inc. |
ST3M454-5L16 | Fastener Innovation Technology, Inc. |
11905-5L16 | Reid Products Inc. |
ST3M454-5L16 | West Coast Aerospace Inc |
HT4025L5-16 | Huck Intl Inc |
10115571 | Nimikkeistokeskus Ncb Finland |