NSN 5305-01-191-2465
High Torque Screw
Internal drive ribbed.
Manufacturer part number AS292-5-11 for national stock number 5305011912465.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-191-2465.
-
MPN or Model
AS292-5-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.462 inches and 0.498 inches -
Fastener Length
Between 1.166 inches and 1.186 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.577 inches and 0.635 inches -
Locking Feature
Detent ball threads -
Grip Diameter
Between 0.3112 inches and 0.3117 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.688 inches and 0.704 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
63000 pounds per square inch -
Hardness Rating
43.0 rockwell c and 47.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.063 inches first hole and 1.079 inches first hole -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 4820-00-001-9554 MPN GV500GCheck Valve
- 5940-00-052-1212 MPN GR540H6CGrounding Metallic Shielded Cable Ferrule
- 1680-00-103-4974 MPN 128SCES101-125Leg Res Garter Assy
- 4920-00-109-6582 MPN 128SEAV12025-3Fire Control System Test Set
- 5935-00-113-9249 MPN GC800HN37-37SElectrical Plug Connector
- 1680-00-123-6770 MPN A51A10117-5Control Panel
- 1560-00-169-0580 MPN 123EC10023-3Duct Assy
- 1560-00-169-2840 MPN 87899-9Aircraft Door
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-191-2465 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AS292-5-11 | Avibank Mfg., Inc. |
GB510CG5-11 | Northrop Grumman Systems Corporation |
AS292-5-11 | Avibank Mfg., Inc. |
GB510CG5-11 | Northrop Grumman Systems Corporation |