NSN 5305-01-193-6849
High Torque Screw
Between 2.113 inches and 2.143 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number HT4049-4D29 for national stock number 5305011936849.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-193-6849.
-
MPN or Model
HT4049-4D29
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 2.113 inches and 2.143 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.081 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 1.802 inches and 1.822 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.000 inches first hole and 2.020 inches first hole -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-080-9291 MPN 3MA333FA7Machine Screw
- 5305-00-151-7974 MPN CVC241-3-16Machine Screw
- 5305-00-402-6244 MPN SC2000B832-16Machine Screw
- 5305-00-905-5568 MPN 3006T69P01Socket Head Cap Screw
- 5305-01-014-6151 MPN S5008-3-7Close Tolerance Screw
- 5305-01-046-5454 MPN HT4016-4-13YSocket Head Cap Screw
- 5305-01-076-4946 MPN SC1810-4-4Close Tolerance Screw
- 5305-01-101-6033 MPN HT4068-6-11Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-193-6849 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4049-4D29 | Arconic Global Fasteners & Rings, |
HT4049-4D29 | Huck International, Inc. |
HT4049-4D29 | Hi-shear Corporation |
HT4049-4D29 | Sps Technologies, Llc |
ST3M714-4D29 | Boeing Company, The |
HT4049-4D29 | Lisi Aerospace Canada Corp |
ST3M714-4D29 | Fastener Innovation Technology, Inc. |
ST3M714-4D29 | West Coast Aerospace Inc |
ST3M714-4D29 | Sps Technologies Ltd Tj Brooks |
HT4049-4D29 | Huck Intl Inc |
10113512 | Nimikkeistokeskus Ncb Finland |
HT4049-4D29 | Alcoa Global Fasteners, Inc. |
11931-4D29 | Reid Products Inc. |