NSN 5305-01-193-6863
High Torque Screw
Between 0.886 inches and 0.916 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number HT4049-3-10 for national stock number 5305011936863.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-193-6863.
-
MPN or Model
HT4049-3-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.886 inches and 0.916 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-211-8165 MPN BACS12BE02-4Machine Screw
- 5305-00-541-9344 MPN HT4025L4D14Close Tolerance Screw
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-01-083-9573 MPN HT4020-3-9AClose Tolerance Screw
- 5305-01-106-3859 MPN HT4068-4-14AClose Tolerance Screw
- 5305-01-193-6858 MPN HT4075V4-11-45Close Tolerance Screw
- 5305-01-216-9860 MPN HT4075V4-8-17Close Tolerance Screw
- 5305-01-310-3963 MPN HT4049-4D6Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-193-6863 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4049-3-10 | Sps Technologies, Llc |
HT4049-3-10 | Hi-shear Corporation |
ST3M714-3-10 | Boeing Company, The |
HT4049-3-10 | Arconic Global Fasteners & Rings, |
HT4049-3-10 | Huck International, Inc. |
ST3M714-3-10 | Huck International, Inc. |
ST3M714-3-10 | Fastener Innovation Technology, Inc. |
ST3M714-3-10 | West Coast Aerospace Inc |
WC4049-3-10 | West Coast Aerospace Inc |
ST3M714-3-10 | Sps Technologies Ltd Tj Brooks |
HT4049-3-10 | Lisi Aerospace Canada Corp |
HT4049-3-10 | Huck Intl Inc |
HT4049-3-10 | Alcoa Global Fasteners, Inc. |