NSN 5305-01-195-2959
High Torque Screw
Between 0.980 inches and 1.010 inches fastener length, pan no. 2 head style, between 0.473 inches and 0.492 inches head diameter, head height: between 0.133 inches and 0.150 inches .
Manufacturer part number NAS5204U10 for national stock number 5305011952959.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-195-2959.
-
MPN or Model
NAS5204U10
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
Between 0.980 inches and 1.010 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.473 inches and 0.492 inches -
Head Height
Between 0.133 inches and 0.150 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Tri-wing recess -
Thread Diameter
0.250 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Titanium alloy -
Material Specification
Ams 4928 assn standard single material response -
Thread Series Designator
Unjc -
Specification Data
80205-nas5204 professional/industrial association standard
More from these suppliers
- 5940-01-382-0217 MPN NAS1063B216-225Terminal Board Marker Strip
- 5940-01-384-3955 MPN NAS1063A20TB42CTerminal Board Marker Strip
- 4920-01-473-3689 MPN NAS1091A48HAi Warning Streamer
- 5935-00-111-1891 MPN NAS1665-14Electrical Connector Backshell
- 5935-00-959-6481 MPN NAS715-23BElectrical Receptacle Connector
- 5305-00-007-9895 MPN NAS1102C04-12PMachine Screw
- 5305-00-052-7433 MPN MS35198-101Machine Screw
- 5305-00-059-7408 MPN MS35202-25Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-195-2959 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS5204U10 | National Aerospace Standards |