NSN 5305-01-195-4952
High Torque Screw
3 keywasys 0.993 in. Min. And 1.023 in. Max long,0.040 in. Min and 0.044 in. Max wide machined in shank. Bore machined in thread end to receive plug.
Manufacturer part number FIT01-0003-4009 for national stock number 5305011954952.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-195-4952.
-
MPN or Model
FIT01-0003-4009
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.516 inches and 0.556 inches -
Fastener Length
Between 1.088 inches and 1.108 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.355 inches and 0.397 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.250 inches -
Grip Length
Between 0.516 inches and 0.556 inches -
Width Across Flats
Between 0.157 inches and 0.159 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-105-7223 MPN CS2405-15SKPanel Screw Assembly
- 5305-01-182-7639 MPN CA28080-08-6HSPanel Screw Assembly
- 5305-01-188-7279 MPN CA2651-3-09Close Tolerance Screw
- 5305-01-222-0827 MPN 28080-4-14PPanel Screw Assembly
- 5305-01-572-9901 MPN GS553BU6-24-20Aircr Captive Screw
- 5930-00-030-5245 MPN 176-34806-1Switch Actuator Arm
- 1560-00-185-2471 MPN 161-17103-2Aircraft Slat
- 1560-00-197-7497 MPN 168-31837Cockpit Enclo Glass
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-01-195-4952 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
FIT01-0003-4009 | Fastener Innovation Technology, Inc. |
CA2194-4-09 | Arconic Global Fasteners & Rings, |
LE111-0003-4009 | Boeing Company, The |
LE111-0003-4009 | Fastener Innovation Technology, Inc. |
CA2194-4-09 | Arconic Global Fasteners & Rings, |
Stock Check
![](/public/images/partscage_shelf3.png)