NSN 5305-01-339-8165
High Torque Screw
Two keyways 180 deg apart along threads.
Manufacturer part number CA21062-10-2-9 for national stock number 5305013398165.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-339-8165.
-
MPN or Model
CA21062-10-2-9
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.400 inches -
Fastener Length
0.562 inches -
Head Style
Pan -
Head Diameter
Between 0.357 inches and 0.373 inches -
Head Height
Between 0.122 inches and 0.133 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
0.062 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Steel comp 301 or steel comp 302 or steel comp 302b or steel comp 303 or steel comp 303se or steel comp 304 or steel comp 304 or steel comp 304l or steel comp 305 or steel comp 308 or steel comp 309 or steel comp 309s or steel comp 310 or steel comp 310s or steel comp 314 or steel comp 316 or steel comp 316l or steel comp 317 or steel comp 321 or steel comp 347 or steel comp 348 or steel comp 384 or steel comp 385 -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1680-01-328-4789 MPN HD11006-103Lru Holder Clamp Assembly
- 5305-00-298-2879 MPN CA1113-5-9PShoulder Screw
- 5305-01-013-4141 MPN CA1376-8-2-10QPanel Screw Assembly
- 5305-01-052-1188 MPN CA2630-04-79Close Tolerance Screw
- 5305-01-165-5594 MPN CA21062-06-2-7Close Tolerance Screw
- 5305-01-222-0826 MPN 28080-4-10PPanel Screw Assembly
- 5305-01-477-5999 MPN CA2254-10-6Machine Screw
- 5306-01-092-8125 MPN SS27576-4-13Machine Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-339-8165 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA21062-10-2-9 | Arconic Global Fasteners & Rings, |