NSN 5305-01-195-4953
High Torque Screw
Between 0.566 inches and 0.596 inches fastener length, oval countersunk head style, between 0.390 inches and 0.395 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number LD111-0047-0403 for national stock number 5305011954953.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-195-4953.
-
MPN or Model
LD111-0047-0403
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.306 inches and 0.356 inches -
Fastener Length
Between 0.566 inches and 0.596 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.390 inches and 0.395 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-068-5402 MPN AIC811-00-3Socket Head Cap Screw
- 5305-00-501-9741 MPN LS15267V3-5Machine Screw
- 5305-01-107-0035 MPN AIC984-4-11Close Tolerance Screw
- 5305-01-196-8132 MPN LD111-0047-0404Close Tolerance Screw
- 5305-01-275-0515 MPN AIC985-4-D7Close Tolerance Screw
- 5305-01-293-7047 MPN AIC985-5-18Close Tolerance Screw
- 5305-01-321-2392 MPN AIC811-02-10Socket Head Cap Screw
- 5305-01-363-4840 MPN AIC-4411-3A14Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-195-4953 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0047-0403 | Boeing Company, The |
LD111-0047-0403 | Sps Technologies, Llc |
LD111-0047-0403 | Arconic Global Fasteners & Rings, |
LD111-0047-0403 | Huck International, Inc. |
LD111-0047-0403 | Sps Technologies, Llc |
LD111-0047-0403 | Sonic Industries Inc. |
LD111-0047-0403 | Hi-shear Corporation |
LD111-0047-0403 | Sps Technologies, Llc |
LD111-0047-0403 | Lisi Aerospace Canada Corp |